DC/DC Remote Capacity Verification

Model

ZYHF-48-III

DC/DC storage battery capacity verification technology is an “energy feedback type” capacity verification technology developed to solve the pain points of traditional capacity verification. It realizes on-line constant current discharge and charging of storage batteries through DC/DC boost-buck circuits without detaching from the system, reducing the impact on power supply continuity. DC/DC storage battery capacity verification technology adopts high-frequency DC/DC modules (the main core is boost circuit and constant current charging module), contactors, diodes and other components, and its working states include three modes: standby floating charge, capacity verification discharge and constant current charging. In the standby floating charge state, the storage battery is directly connected to the system; during capacity verification discharge, the DC/DC boost circuit raises the storage battery voltage to be higher than the DC bus voltage, making the storage battery supply power instead of the rectifier; after discharge, it automatically switches to constant current charging to restore the storage battery capacity.

Parameters

Technical Parameters

Technical Parameters

Parameter Category	Name	Parameter Example/Range
Electrical Parameters	Rated Power	3kW (Customizable)
	Battery Side (Input)	Voltage Range: 40V – 65V DC; Maximum Current: 0 – 100A
	Bus Side (Output)	Voltage Range: 42V – 58V DC
	Feedback Efficiency	≥90% (Rated Working Condition)
	Ripple Coefficient	≤1%
Control Parameters	Discharge Mode	Constant current, constant power, constant resistance, step discharge
	Discharge Current Accuracy	±1%
	Voltage Measurement Accuracy	±0.5%
	Capacity Calculation	Automatically calculated and displayed (Ah, %)
Functional Characteristics	Working Modes	Capacity verification discharge, intelligent charging
	Protection Functions	Overvoltage, undervoltage, overcurrent, short circuit, reverse connection, overheating, single battery protection, AC power failure, abnormal faults, etc.
	Data Recording	Report generation, storing capacity verification curves and data
	Communication Interfaces	RS485, Ethernet Port, USB
Physical Environment	Cooling	Intelligent Temperature-Controlled Fan
	Display	LCD Touch Screen
	Operating Temperature	-10℃ ~ 50℃
	Size/Weight	19-inch 2U/7U standard chassis, ≤30kg

Related Products

YZM5 Series Molded Case Circuit Breakers

The YZM5 series molded case circuit breakers have a rated insulation voltage of 1000V. They are suitable for power distribution networks with AC 50Hz, rated voltage of 400V and below, and rated current up to 1250A. Under normal conditions, the circuit breaker can be used for infrequent conversion of lines and infrequent starting of motors respectively. It protects lines against overload and short circuit, and also has protection functions against overvoltage, undervoltage and phase failure of lines.

YZ1-IBLE Series Intelligent Residual Current Operated Switches

The JL1-IBLE intelligent switch product features functions including remote switching on/off, over/under voltage protection, over-temperature protection, electronic overload protection, and leakage protection. It is equipped with RS485 communication method. Cooperating with an intelligent gateway, it can timely upload information such as real-time data, operating status, line faults, and alarms to the Electrical Safety IoT Supervision Platform. This realizes data monitoring, hidden danger management, energy consumption management, and power consumption optimization and improvement of the power distribution system, effectively enhancing the comprehensive perception capability of the line and improving the safety and reliability of power supply.

YZIBx Series Intelligent Circuit Breaker Products

YZIBx Series IoT Circuit Breaker is suitable for low-voltage power grid lines with AC 50/60 Hz, rated voltage AC 230V/400V (customizable), and rated current up to 63A. The product features remote switching on/off, overload and short-circuit protection, over-voltage and under-voltage protection, over-temperature protection, electronic overload protection, phase failure protection, etc. Equipped with an RS485 communication interface, it can upload real-time data, operating status, line faults, alarms and other information to the electrical safety IoT supervision platform in a timely manner when paired with an intelligent gateway. It realizes data monitoring, hidden danger management, energy consumption management and power consumption optimization of the power distribution system, effectively enhancing the comprehensive perception ability of the lines and improving the safety and reliability of power supply.

ABOUT US

About Us - Introducing our team,
mission, and values.

DC/DC Remote Capacity Verification

Model

Parameters

Related Products

ABOUT US

About Us - Introducing our team, mission, and values.

DC/DC Remote Capacity Verification

Model

Parameters

Related Products

Tell Us Your Requirements Questions Needs Ideas Plans

About Us - Introducing our team,
mission, and values.